New Products
S-series ice machines
The new S-Series Manitowoc design cuts the ice harvest time in half, reduces
energy use up to 25%, runs whisper-quiet, and is simpler to clean.
AlphaSan® is molded into the parts to reduce biofilm (slime) and
the number of surfaces that require cleaning have been reduced, which
will lower maintenance costs and extend operating life. Sharp edges
have been replaced with soft, round surfaces making cleaning faster
and easier. Front doors allow easy access to serviceable parts and
no tools are required to remove main components. The S-Series are the
first ice machines designed to meet the demanding criteria for sanitation
established by NSF/ANSI Standard 12 – 2003.
Click
here to learn more about the Manitowoc S-Series Ice Machines.
BevClean™
Cleans and sanitizes fountain dispensing systems from the syrup adapters
to the dispensing nozzles, and everything in between. Traditional
cleaning usually takes two service technicians an hour, but BevClean
only takes
one service technician fifteen minutes! BevClean comes in a three
gallon bag-in-box that can clean up to eight beverage lines simultaneously,
and doesn’t require rinsing!
Glen Adkins, Denver Syrup & Bar Supply, Inc., reports, “My partner, Dennis, was complaining that the soft drink from our fountain machine for our employees tasted old. We put a new box of syrup on the line, but that did not solve our problem. I suggested we try the BevClean that we use on the juice lines to see if that would help; after all, we have been using the BevClean for a couple of months now. We flushed the line and the ‘off’ taste was gone, just like that. I have to admit, I was a bit surprised that the taste problem was solved so easily. It’s making me rethink my position about flushing post-mix syrup lines. We are going to incorporate this product into our new preventative maintenance program for post-mix systems. Thanks for developing a product that really does what it says it does.”
Metallocraft FOB
High quality stainless steel Metallocraft FOB detector controls foam
and eliminates waste when a keg empties. The FOB detector maintains
full lines, prevents high pressure spray, and enables rapid keg changeovers.
This valuable beer accessory pays for itself in a couple of days or
weeks depending upon keg turnover.
Flojet G56 Flow Reversal Valve
The flow reversal valve saves valuable time and increases effectiveness
of beer line cleaning by enabling cleaning solution to run through
a pump-driven beer system in both directions; from the faucet to the
tapping device, and vice-versa, which improves cleaning results. Plus,
you can clean multiple lines simultaneously!
